Clicking the full screen icon in the header displays all the camera feeds in full screen mode. Clicking the full screen icon in a single camera panel displays the single camera feed in full screen mode.
The whole camera layout can be set to full-screen mode, not just a single media stream.
To exit full screen mode
|
Camera settings can be adjusted by clicking on the icons in the right upper corner of the camera panel:
Audio setting: The audio of a particular camera can be turned on or off by clicking the Toggle Audio on/off in the top right corner of the camera panel.
Full screen icon: Clicking the full screen icon in a camera panel displays the camera feed in full screen mode.
Only one camera of a room can have its audio turned on at a time. |
The sizing of camera streams might not be optimal (an additional black bar/stripe might be visible at the upper and lower edges of the screen) with a 4:3 video size (aspect ratio). The recommended ratio is 16:9 (e.g. 1280x720), which can be set within the Camera settings window of the Cameras page, in the System Module. |
The following pan-tilt-zoom (PTZ) functionalities are available during recording, to improve camera movements:
On-Screen PTZ: Click in the center of the video , drag the crosshair and pull the camera into the desired direction. The movement of the camera will stop by releasing the mouse.
On-Screen PTZ is focused on the middle of the screen, thus it cannot be used in the footer and header of the SRV camera feeds. |
The audio of a particular camera can be turned on or off by clicking the audio icon in the top right corner of the camera panel.
Only one camera of a room can have its audio turned on at a time. |
The mute/unmute functionality during Live recording in the Single Room View operates as follows:
First click: (on the icon when it is in muted state) unmutes the given camera stream and other unmuted streams stay unmuted too.
The icon on all unmuted streams changes to an icon showing that multiple streams are unmuted.
Second click: mutes all other cameras (even the unmuted ones) and only the selected camera stream stays unmuted.
Third click: mutes the selected camera stream as well.
Clicking the Recording setup in the header prompts the Recording Setup pop-up window to appear where the Learners and Faculty (FON) can be added to a recording.
The Learners/Staff dropdown only gets active, once Learner/FON Group has already been selected. |
Selected participants show up as 'disabled' (greyed out) in the Learners dropdown. |
Participants who have not been selected, are active in the dropdown and thus can be selected. |
In CAE LearningSpace Experience, an Instructor manages the scenario on the patient simulator via the instructor workstation (tablet, control workstation) and LearningSpace captures the data of the simulator. (Therefore, no Sim Control Panel is available in any of the Recording views.) |
With this functionality, the bottom- and side panels can be minimized in order to maximize the displayed camera- or media view.
The toggle reveals itself by hovering over the bottom- or side panel, or on the panel border lines. When activated (i.e. camera view is maximized), the toggle arrows are displayed constantly. |
In some cases, two camera views need to be displayed on top of each other (i.e. in a single column) during recording.
In the latest versions of CAE LearningSpace, the utilization of the space available in the Single Room View panels can be maximized and the panels on the right side (Annotations tab, Layout tab) or additional windows can be displayed in a larger size, by using the Vertical double layout feature.
See also our Practical Recording and Recording - FAQ pages. |