Layout tab
The Layout tab can be found on the right-hand side of the Single Room View and contains the Layout settings and the Media section panels.
Here, users can choose from the following views to get the most convenient and suitable layout for their aims:
- Double view: 2x1 feeds displayed
- Quad view: 2x2 feeds displayed
- Pinned view: 1+5 feeds displayed, one feed is highlighted
- 3x3 view: A maximum of nine feeds displayed
- Single view: One selected feed is displayed. Picture-in-Picture view can be enabled by the toggle:
Vertical Double Layout
In some cases, two camera views need to be displayed on top of each other (i.e. in a single column) during recording.
In the latest versions of CAE LearningSpace , the utilization of the space available in the Single Room View panels can be maximized and the panels on the right side (Annotations tab, Layout tab) or additional windows can be displayed in a larger size with the help of the Vertical double layout feature.
IMPORTANT
While the Layout tab is active, the on-screen Camera controls (e.g. PTZ) are disabled.
The recommended video size (aspect ratio) is 16:9 (e.g. 1280x720).
The sizing of camera streams might not be optimal with a 4:3 video size (an additional black bar/stripe might be visible at the upper and lower edges of the screen).
For new rooms, before saving personalized layouts, all media sources are displayed in the optimal layout by default.
Media section
Camera feeds and simulator-related media (CTG, waveform and trendchart/patient monitor) added to a room are available in the Media section. Media can be moved to and removed from the video layout - pinned or unpinned - by using the drag-and-drop or the pin-to-layout functionalities. This way, only the selected media sources will be presented to the viewers.
Drag-and-drop functionality
Media sources (camera feeds, physio apps) can be moved into the layout or into the Media section as desired, using the new drag-and-drop functionality of the SRV. 
Pin-to-Layout
Media sources can be "pinned" to the layout also by clicking on the 
icon in the respective feed.
Media can be "unpinned" by clicking the 
in the right upper corner of the camera/media panel, and thus moving it to the Media section.
Picture-in-Picture
One desired camera feed/media source can be displayed in a focused way, while the rest of the media sources (a maximum of four) are displayed in the corners of the video layout.
Media sources (camera feeds, physio apps) can be moved into the layout or into the Media section as desired, using the new drag-and-drop or pin-to-layout functionalities of the SRV.
The Picture-in-Picture toggle is only available in the single Layout view.
See also our Practical Recording and Recording - FAQ pages and watch our related Training Videos.
Overview
Content Tools