The Layout tab can be found on the right-hand side of the Single Room View and contains the Layout settings and the Media section panels.
Here, users can choose from the following views to get the most convenient and suitable layout for their aims:
Double view: 2x1 feeds displayed
Quad view: 2x2 feeds displayed
Pinned view: 1+5 feeds displayed, one feed is highlighted
3x3 view: A maximum of nine feeds displayed
Single view: One selected feed is displayed. Picture-in-Picture view can be enabled by the toggle:
IMPORTANT
While the Layout tab is active, the on-screen Camera controls (e.g. PTZ) are disabled.
The recommended video size (aspect ratio) is 16:9 (e.g. 1280x720). The sizing of camera streams might not be optimal with a 4:3 video size(an additional black bar/stripe might be visible at the upper and lower edges of the screen).
For new rooms, before saving personalized layouts, all media sources are displayed in the optimal layout by default.
Media section
Camera feeds and simulator-related media(CTG, waveform and trendchart/patient monitor) added to a room are available in the Media section. Media can be moved to and removedfrom the video layout - pinned or unpinned - by using the drag-and-drop or the pin-to-layout functionalities. This way, only the selected media sources will be presented to the viewers.
Drag-and-drop functionality
Media sources (camera feeds, physio apps) can be moved into the layout or into the Media section as desired, using the new drag-and-drop functionality of the SRV.
Pin-to-Layout
Media sources can be "pinned" to the layout also by clicking on the icon in the respective feed.
Media can be "unpinned" by clicking the in the right upper corner of the camera/media panel, and thus moving it to the Media section.
Picture-in-Picture
One desired camera feed/media source can be displayed in a focused way, while the rest of the media sources (a maximum of four) are displayed in the corners of the video layout. Media sources (camera feeds, physio apps) can be moved into the layout or into the Media section as desired, using the new drag-and-drop or pin-to-layout functionalitiesof the SRV.
The Picture-in-Picture toggle is only available in the single Layout view.