Enterprise Help Site

Page tree

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 20 Next »

From our 2022 Summer release, the Single Room View (SRV) of CAE LearningSpace Enterprise will have a much cleaner, more easy-to-use user interface on both the Recording and  Video Review pages, and by so, increasing efficiency and enhancing user experience. 
See what is changing in your CAE LearningSpace Enterprise environment with this new release:

List of Enhancements of the Single Room View



The SRV layout re-organized

The user interface of the Single Room View becomes re-organized for more efficiency in the following way:

Re-organized basic layout

    • Video player has been moved to the left hand side
    • Annotations and Data Entry tab has been moved to the right side, Simulator Control has been added
    • Record control has been renamed to Recording setup
    • Intercom and Video control section has been moved to the bottom
    • Send to Screen option  and Simulator Panel (widget) has been added at the bottom
    • Bottom panel can be minimized

Layout tab

The Layout tab can be found on the right-hand side of the Single Room View and contains the Layout settings and the Media section panels.

IMPORTANT: While Layout tab is active, the on-screen Camera controls (e.g. PTZ) are disabled (due to the drag-and-drop feature).

Layout settings section 

In the new Single Room View layout, users can choose from the following views to get the most convenient and suitable layout for their aims:

  1. Double view:  2x1 feeds displayed
  2. Quad view:     2x2 feeds displayed
  3. Pinned view:  1+5 feeds displayed, one feed is highlighted
  4. 3x3 view:         A maximum of nine feeds displayed
  5. Single view:    One selected feed is displayed. Picture-in-Picture view can be enabled by the toggle:



For new rooms,  before saving personalized layouts, all media sources are displayed in the optimal layout by default.

IMPORTANT CHANGE: With this new release, Layout is saved as part of the User’s settings and it is no more saved as part of the Room’s setup.
This means that, while there is no option to have someone set up a custom layout for a given room to be shared with everyone, each user will see their own custom setup and they will not overwrite each other.

Updates to Full screen mode:

    • Camera layout can be put to full-screen mode with a slider component at bottom

    • Slider is available on 1-video full-screen mode  ???

Media section 

Cameras and Media related to simulators (physio panel, waveforms, CTG) added to a room are available here.

Drag-and-drop functionality

Media source (camera feeds, physio apps) can be moved into the layout or into the Media section as desired, using drag-and-drop. This way, only the selected media sources will be presented to the viewers. 

*** insert gif?***

Media sources can be "pinned" to the layout also by clicking on the icon in the respective feed. The arrow turns orange when hovering over it .

By default, recording will apply to all media - whether it is added to the video player section or not. This can be overwritten in the Recording setup section.

Media can be "unpinned" by clicking the in the right upper corner of the camera/media panel, and thus moving it to the Media section.

Picture-in-Picture

One desired camera feed/media source can be displayed in a focussed way, while the rest of the media sources (a maximum of four) are displayed in the corners of the view.
Media sources can be moved using drag and drop.

***insert gif?**


The Picture in picture toggle is only available in the single Layout view.


Annotation section re-designed

From this new release, LearningSpace users can

  • pre-select the color of a free-text annotation

  • pre-select the color of a preset annotation
  • choose a category for an annotation/preset in an easier way
  • see the "All" phrase on the card, if annotation is added to “All learners” (the name of all learners will not be displayed separately on the annotation card).

The time of typing the first character will be displayed as the timestamp of an annotation.

Color name of annotation

The name of the color of an annotiation is displayed when hovering over the annotation on the timeline to comfort colorblind users.

 


PTZ functionalities

With the new release, new ways of pan-tilt-zoom (PTZ) functionalities are introduced.

  • On-Screen PTZ: click in the centre of the video and pull the camera into the desired direction. The movement of the camera will stop by releasing the mouse.
  • Scroll-to-zoom: zoom-in and zoom-out by scrolling on the mouse.
  • Pan-tilt-move: camera will move in the direction of the area of the camera feed clicked.
  • Area zoom: camera zooms into the area drawn by the user.
  • Move and reset buttons: camera movement can be controlled by the arrows and magnifying glass icons. Zoom level can be reset to the default value with the Reset zoom icon.

       
    ***insert gifs ***

Playback

During live recordings the following enhancements can make video review easier:

  • Recording can be paused or played back by dragging the slider to the desired point on the video slider.

Video can be paused and slider can be dragged after 30 seconds have passed from the start of recording. Before that time the pause button is greyed out and the slider cannot be moved. 



  • Both current and live timestamp are displayed next to each other in the video record panel. Live view can be switched back to by pushing the Go Live button.


Simulator panel

Simulator panel ('widget') is introduced in the Recording panel. When a simulator is connected and assigned to a room, the SRV (single room view) of then Recording module will have Simulator panel displayed. The Simulator panel provides information about

  • the main physiological data,
  • the simulation scenario running on the manikin: including the Simulation (SCE) Title, the actual ('Current') and the upcoming ('Next') States.

  • The Simulation scenario can be

    • played
    • stopped
    • paused  
    • changed (by selecting another scenario from the drop-down)

The Next State drop-down menu allows for moving onto a selected State.


***replace with gif from Ent! ***

Simulator Control tab

CAE Healthcare simulators associated with a room display their respective Waveform and Simulator Log in the Single Room View and get recorded along with the camera feed when REC is started.
***replace with proper screenshot for Ent ***

Installing and connecting a simulator can be done within the System module. 

The Waveform and Sim Log display figures in synchrony with the video feed.??

Intercom via Simulator 

From this release, Intercom can be used via Simulators as well, within CAE LearningSpace Enterprise: announcements can be sent to the simulator's head ("patient speaking"), by pushing the Simulator button in the Intercom area.

**replace with proper screenshot***

Send to Screen option

With the help of a decoder (**more info'?-- Ess. Send to screen*)), given media can be sent to a display in the room. Although this section is always visible, it is only useful when using Maestro simulators (***link to CAE page?**) in the room. 

Picture files can be sent to different display monitors by clicking the corresponding button. There are two kinds of output for the Send to Screen function:

    1. display monitor
    2. TouchPro patient monitor of the JUNO simulator

The Send to Screen option requires the following technical setup to be completed: 

    • monitor/ decoder and/or JUNO simulator connected and assigned to the room (within the System Manager)
    • content uploaded (Case/SCE - coming in the next release of LearningSpace - or Maestro)
    • event scheduled in the room with specific Case assigned (if other than TouchPro)

 


(question) Content can only be uploaded either within a Case/SCE (for the display monitor) or via Maestro (for the JUNO).

In case of the former, for the content to be available, the Case/SCE including that content has to be assigned to the recording. A Case/SCE can only be linked to a recording through scheduling an event, as a consequence, Send to Screen feature is only possible via an Event for recording.

If a JUNO simulator is connected, content uploaded via Maestro will be available for sending.

SRV in Video Review

The Single Room View in Video Review has the exact same layout as the SRV of the Recording module, with the following differences:

  • no Intercom and Simulator widget available
  • no camera control options (ptz etc.) are available

  • Information panel is added: by clicking on the More Details link, Simulation details can be viewed (Learners, SP, FON, Activity, Case). This panel can be minimized for more space on the focused content.


    In Video Review, all media associated with the Simulation can be viewed in the Send to Screen panel.


  • No labels