This feature is to be used with in-campus audiovisual (AV) inputs. Hence, it is not available for LearningSpace Enterprise Lite, as the solution is used for web-conferencing-based virtual simulation encounters only. To unlock this feature, please upgrade to the LearningSpace Enterprise solution. |
LearningSpace can accommodate and third-party simulators. Connecting a simulator to the system can be done on the Simulators tab.
All LearningSpace systems can be capable of capturing any simulator's signals. Depending on the LearningSpace system you are using, there are different hardware configurations required.
If connected directly to a network (without using a Wireless Bridge), the simulator will not be detected and the setup will not function as intended. |
If connected directly to a network (without using a Wireless Bridge), the simulator will not be detected and the setup will not function as intended. |
A Wireless Bridge is necessary for setting up a correct connection (exception: ONE appliances, UltraPortable units, where a dedicated Ethernet port is available on the device (See above). |
If connected directly to a network (without using a Wireless Bridge), the simulator will not be detected and the setup will not function as intended. |
LearningSpace can accommodate and third-party simulators. Connecting a simulator to the system can be done on the Simulators tab.
The Wireless Bridge Settings pop-up can be opened via the Controls cogwheel .
Here, Device Name can be added to wireless bridges for easier detection and distinction, and they can be connected to available wireless networks as well.
The Device Name field becomes editable by pressing the blue pencil icon . |
By pressing Connect, the bridge connects to the selected wireless network:
IMPORTANT: Pressing Connect will not save modified Device name (if Save is not pressed prior to that). |
Learn more on our System Manager pages or download our PDF document. |