Page History

Preliminary Setup

System Manager: The desired camera(s) and simulator have to be assigned to a specific room.

Process Flow

Entering the desired SRV via the CO:

1. Click the intended room panel.

2. Add participants via the Recording setup.

   Note
   IMPORTANT: No modification is allowed during recording, therefore after clicking the REC control, participant groups or SCE can only be assigned to a completed (saved) video recording in the Video Review module.

   
   

3. Start the recording by clicking the REC button.

   Tip
   TIP: Adjust camera feed if necessary. See the relevant description about adjusting a camera.

   
   

4. Add annotations in the corresponding panel.
5. Send intercom announcements or push content to connected monitors.
6. Click the Stop button to end the recording.

Entering the desired SRV via the Dashboard:

1. Click the cogwheel icon in the Recording tile on the Dashboard.
2. In the Start Recording pop-up window, click the Room for recording radio-button and select the desired room from the drop-down.
3. Add participant groups via the relevant tab of participants.
4. Click the Go to recording button to enter the SRV of the selected room.

5. Start the recording by clicking the REC button.

   Tip
   TIP: Adjust camera feed if necessary. See the relevant description about adjusting a camera.

   
   

6. Add annotations in the corresponding panel.
7. Send intercom announcements or push content to connected monitors.
8. Click the Stop button to end the recording.