Page History

On the Rooms tab, rooms can be added, modified or deleted.

New room can be added by clicking the Add New Room button then typing in the number/ name and description of the room in the corresponding fields of the prompted pop-up.

All the available rooms are listed, with their editable settings accessed by clicking the cogwheel icon in the Controls column.
The icon opens the Room Settings pop-up where all devices can be assigned to the room, including cameras, manikin andintercom device.

Room Settings pop-up

The pop-up can be opened by clicking the cogwheel next to the desired room and allows for the specification of the following settings:

Room no.: either a number or a name by which the room is to be distinguished

Room description: the type of the room (e.g. simulation lab, skills lab, auditorium etc.)

In-room Station: computer designated for SP data entry

Separate In-room Intercom device: device for in-room intercom announcements 

Hallway Station: computer designated for learner data entry (submitting Pre- or Post-Encounter Learner Part)

Separate Hallway Intercom device: device for intercom announcements outside the room 

Additional Station: computer designated for display functions

Simulator: selecting one of the available simulators located in the room

Camera #1-5: assigning a maximum number of 5 configured cameras

Record control: assigning a tactile REC button to the room (which is physically located in the room and can be pressed to start a recording)

Location: determining a location (building, site etc.) where the room belongs