From our 2022 Summer release, the Single Room View (SRV) of CAE LearningSpace Enterprise will have a much cleaner, more easy-to-use user interface on both the Recording and Video Review pages, and by so, increasing efficiency and enhancing user experience.
See what is changing in your CAE LearningSpace Enterprise environment with this new release:
List of Enhancements of the Single Room View
SRV layout re-organized
The user interface of the Single Room View becomes re-organized for more efficiency in the following way:
Re-organized basic layout
- Video player has been moved to the left hand side
- Annotations and Data Entry tab has been moved to the right side
- Simulator Control and Layout tab has been added
- Record control has been renamed to Recording setup
- Intercom and Video control section has been moved to the bottom
- Send to Screen option and Simulator Panel (widget) has been added at the bottom
- Bottom panel can be minimized
In the new Recording setup pop-up Activity, Case and Participants can be selected for recording:
Layout tab
The Layout tab can be found on the right-hand side of the Single Room View and contains the Layout settings and the Media section panels.
IMPORTANT: While Layout tab is active, the on-screen Camera controls (e.g. PTZ) are disabled (due to the drag-and-drop feature).
Layout settings section
In the new Single Room View layout, users can choose from the following views to get the most convenient and suitable layout for their aims:
- Double view: 2x1 feeds displayed
- Quad view: 2x2 feeds displayed
- Pinned view: 1+5 feeds displayed, one feed is highlighted
- 3x3 view: A maximum of nine feeds displayed
- Single view: One selected feed is displayed. Picture-in-Picture view can be enabled by the toggle:
For new rooms, before saving personalized layouts, all media sources are displayed in the optimal layout by default.
IMPORTANT: With this new release, Layout is saved as part of the User’s settings and it is no more saved as part of the Room’s setup. This means that, while there is no option to have someone set up a custom layout for a given room to be shared with everyone, each user will see their own custom setup and they will not overwrite each other.
After upgrading to the new SRV, already existing Room layouts will be lost/reset.
Updates to Full screen mode:
Camera layout can be put to full-screen mode with a slider component at bottom
Slider is available on 1-video full-screen mode ???
Media section
Camera feeds and simulator related media (CTG, waveform and trendchart/patient monitor ) added to a room are available in the Media section and can be moved to/removed from the video layout ("pinned/unpinned" ) by using the drag-and-drop or the pin-to-layout functionalities.
CTG, waveform and trendchart/patient monitor are displayed in separate windows from now on.
Drag-and-drop
Media source (camera feeds, physio apps) can be moved into the layout or into the Media section as desired, using the new drag-and-drop functionality of the SRV . This way, only the selected media sources will be presented to the viewers. 
Pin-to-Layout
Media sources can be "pinned" (moved) to the layout also by clicking on the 
icon in the respective feed. The arrow turns orange when hovering over it 
.
Media can be "unpinned" (removed) by clicking the 
in the right upper corner of the camera/media panel, and thus moving it to the Media section.
IMPORTANT: By default, recording will apply to all media - whether it is added to the video player section or not. This can be overwritten in the Recording setup section.
Picture-in-Picture
One desired camera feed/media source can be displayed in a focussed way, while the rest of the media sources (a maximum of four) are displayed in the corners of the video layout.
Media sources (camera feeds, physio apps) can be moved into the layout or into the Media section as desired, using the new drag-and-drop or pin-to-layout functionalities of the SRV. This way, only the selected media sources will be presented to the viewers.
The Picture in Picture toggle is only available in the single Layout view.
Annotation section re-designed
From this new release, LearningSpace users can
pre-select the color of a free-text annotation
- pre-select the color of a preset annotation
- choose a category for an annotation/preset in an easier way
- see the "All" phrase on the card, if annotation is added to “All learners” (the name of all learners will not be displayed separately on the annotation card).
The time of typing the first character will be displayed as the timestamp of an annotation.
Color name of annotation
The name of the color of an annotation is displayed when hovering over the annotation on the timeline to comfort users with color-detection challenges.
Simulator Control tab
When a simulator is connected and assigned to a room of CAE LearningSpace, the SRV of the Recording module has the Simulator Control tab displayed. Simulation data can be monitored and controlled from here such as: SCE/Case, Current State, Next State (by selecting it from the respective drop-down and clicking 
). Also, the simulation scenario can be started/played 
, paused 
and stopped 
on this tab as well.
Installing and connecting a simulator can be done within the System module.
CAE Healthcare simulators associated with a room display their respective Waveform and Simulator Log in the Single Room View and get recorded along with the camera feed when REC 
is started. The Waveform and Simulator Log display figures in synchrony with the video feed.
Physio apps (Waveform, Trendchart, CTG) are not recorded if started during a running recording.
Simulator panel
Simulator panel ('widget') is introduced with this release in the Recording panel. When a simulator is connected and assigned to a room, the SRV of the Recording module will have the Simulator panel displayed in the bottom panel.
The Simulator panel provides information about
- the main physiological data,
- the simulation scenario running on the manikin: including the Simulation (SCE) Title, the actual ('Current') and the upcoming ('Next') States.
The Simulation scenario can be
- played
- paused
- stopped
- changed (by selecting another scenario from the drop-down)
- played
The Next State drop-down menu allows for moving onto a selected State. 
Intercom via Simulator
From this release, Intercom can be used via Simulators as well, within CAE LearningSpace Enterprise: announcements can be sent to the simulator's head ("Voice of Patient"), by pushing the Simulator button in the Intercom area.
IMPORTANT Feature change: The same announcement cannot be sent to the Room and to the Hallway simultaneously.
Send to Screen option
With the help of a decoder (maybe insert info from How can the Send to Screen function be used?), given media can be sent to a display in the room. Although this section is always visible, it is only useful when using Maestro simulators (https://www.cae.com/healthcare/products/ – any description of Maestro??) in the room.
Picture files can be sent to different display monitors by clicking the corresponding button. There are two kinds of output for the Send to Screen function:
- display monitor
- TouchPro patient monitor of the JUNO simulator
The Send to Screen option requires the following technical setup to be completed:
- monitor/ decoder and/or JUNO simulator connected and assigned to the room (within the System Manager)
- content uploaded (Case/SCE - coming in the next release of LearningSpace - or Maestro)
- event scheduled in the room with specific Case assigned (if other than TouchPro)
Content can only be uploaded either within a Case/SCE (for the display monitor) or via Maestro (for the JUNO).In case of the former, for the content to be available, the Case/SCE including that content has to be assigned to the recording. A Case/SCE can only be linked to a recording through scheduling an event, as a consequence, Send to Screen feature is only possible via an Event for recording.
If a JUNO simulator is connected, content uploaded via Maestro will be available for sending.
PTZ functionalities
With the new release, new ways of pan-tilt-zoom (PTZ) functionalities are introduced to improve camera movements.
On-Screen PTZ: Click in the center of the video
and pull the camera into the desired direction. The movement of the camera will stop by releasing the mouse.
On-Screen PTZ is focused on the middle of the screen, thus it cannot be used in the footer and header of the SRV camera feeds.
- Scroll-To-Zoom: zoom-in and zoom-out by scrolling on the mouse.
- Pan-Tilt-Move: camera will move in the direction of the area of the camera feed clicked.
- Area Zoom: camera zooms into the area drawn by the user.
- Move and reset buttons: camera movement can be controlled by the arrows and the magnifying glass icons in the right lower corner of the camera feed. Zoom level can be reset to the default value with the Reset zoom icon.
When upgrading to the new SRV, already existing PTZ presets will stay intact.
Playback
During live recordings the following enhancements can make video review easier:
- Recording can be paused or played back by dragging the slider to the desired point on the video slider.
- Both current and live timestamps are displayed next to each other in the video record panel. Live view can be switched back to by pushing the Go Live button.
Video can be paused and slider can be dragged after 30 seconds have passed from the start of recording. Before that time the pause button is greyed out and the slider cannot be moved.
SRV in Video Review
The Single Room View in Video Review has the exact same layout as the SRV of the Recording module, with the following differences:
- no Intercom and Simulator widget available
- no camera control options (ptz etc.) are available
Information panel is added: by clicking on the More Details link, Simulation details can be viewed (Learners, SP, FON, Activity, Case). This panel can be minimized for more space on the focused content.
In Video Review, all media associated with the Simulation can be viewed in the Send to Screen panel.
Overview
Content Tools