On the Rooms tab, rooms can be added, modified or deleted.
All the available rooms are listed on this page, with their editable settings accessed by clicking the cogwheel icon in the Controls column. The icon opens the Room Settings pop-up where all devices can be assigned to the room, including cameras, manikin, and intercom device.
Add New Room: by clicking on the Add New Room button you get the Room Settings pop-up window. There you have to fill out the Room no. and Room description fields. After clicking on the Add button you get additional setting options for the new room.
You can also add a Separate In-room Intercom device, a Separate Facilitator Intercom device and a Simlog uploader station to the room here.
Learn more about How to set up a new room in LearningSpace here. |
The pop-up can be opened by clicking the cogwheel next to the desired room and allows for the specification of the following settings:
IMPORTANT: Once a simulator is assigned to the room, the 4th camera slot is reserved for the patient monitor. |
Save: keep all changes and close the Room Settings window
Delete: remove the currently open room from your LearningSpace system
Close: discard all changes and close the Room Settings window.
In the latest release of LearningSpace, #6 #7 #8 #9 optional camera selector dropdowns have been added to the Room editor of the System manager.
It behaves the same as the previously added camera dropdowns and it allows the Single Room View's (SRV) 3x3 layout to be used with camera feeds only.
The feature needs to be enabled on the backend and can be configured for as many cameras (max 9) as necessary/desired by the customer.
In the latest versions of LearningSpace, besides starting and stopping a recording, Privacy mode can also be controlled by using a Push-button within the physical rooms.
When Privacy Mode is ON, no one can see through the camera feeds into the room, so complete privacy ensured. The cameras will be blocked until Privacy Mode is turned off.
Once a Push-button has been connected to a DAK (Digital Audio Kit) physically, and the DAK is configured on the Cameras tab,
it can be selected as a
from the following two drop-downs of the Room Settings pop-up:
A Push-button hardware can only be assigned to a room once. Once assigned, it cannot be selected from the other drop-down any longer - otherwise the following error message comes up: One Push-button can only be added to one room within the system. |
|
In case any of the Cameras within the room do not support Privacy Mode, the following warning message appears:
Light indication colors of the Push-Button functioning as a Record control button have the following statuses: Light indication colors of the Push-button functioning as a Privacy control button change according to the following statuses: |