As an SP user, you can block the camera views in your room by turning on Privacy Mode.
When Privacy Mode is ON, no one can see into your room, so you can change clothes or participate in sensitive scenarios in complete privacy. The cameras will be blocked until you turn OFF Privacy Mode.
As an SP user, you can apply Privacy Mode inside the room where you are performing your current scenario using the room's authorized In-room station. You can access Privacy Mode in your user profile where you can switch off and on the camera feeds any time you require privacy: when changing into hospital gowns, or in case of other sensitive situations that occur as part of a physical examination—regardless of the status of recording in the room.
Manage Your Privacy in the Exam Room
Turn Privacy Mode ON or OFF by clicking the Privacy Mode icon located in the top right corner of the screen under your name:
Important
Privacy Mode is only available if the computer you are logging into is added to the exam room as an In-room station in CAE LearningSpace. If in doubt, consult your instructor or system administrator to make sure your workstation is set up properly.
When you enable Privacy Mode, the camera feeds of the room are disabled:
Auto-Mute Setup
Note
*Privacy Mode's auto-mute setting can only be changed system-wide; it cannot be adjusted for each room separately.
Privacy Mode Status
Privacy Mode ON | Privacy Mode OFF | |
---|---|---|
Icon & Status | ||
Room Status | The camera feeds do not load (they go black). | The camera feeds load in displaying the area in the cameras' angle. |
Minimize Privacy Mode in your profile using the arrow under the icon.
Where to Find Privacy Mode in Your Profile
You can take control of the room's camera feeds even if you are not added as a participant to the activity currently running in the room. Privacy Mode is available with or without any activity assigned to the room as long as an In-room station is added to the room in CAE LearningSpace.
You can access Privacy Mode right away on your Dashboard:
You can also access the room's privacy setting on the case or learner selection page:
Or while you are completing data entry:
Troubleshooting
The In-room station of the exam room is disconnected.
A workstation might be disconnected because it has been assigned a new IP address.
Solution
Contact the event coordinator or SP manager.