How to Save PTZ Camera Preset Positions in Single Room View (SRV)

You can save the positions of the pan-tilt-zoom (PTZ) cameras installed in your simulation rooms.
PTZ presets can be set up in the live stream control panel of each PTZ camera after entering Single Room View (SRV).

Saving PTZ Presets

After positioning your PTZ camera, save the current position as a preset:

• Click the Select PTZ Preset drop-down. 

• The formerly added positions appear in a list. 

  Use the mini search bar to search in an extensive list of preset positions.

• Click Add new PTZ Preset.

An empty field appears in place of the drop-down.

• Enter the name of the preset.

• Click on the tick to save or 'x' to cancel the preset.

Apply a PTZ Preset Position

1. Enter Single Room View (SRV).
2. Click on the cogwheel icon of a video stream to display control tools.
3. Click the Select PTZ Preset drop-down.

4. Select a preset from the list. 
   The camera will automatically turn and zoom to the selected position.

   Important

   Each PTZ position is tied to the camera the position was created for. New PTZ positions become available in Camera Settings in the Cameras tab inside System.

Apply the Same Preset Position to Multiple Rooms

PTZ Camera Controls for System Managers

• 
• PTZ Click-To-Center
• 
•  How to Control PTZ Cameras with Single Room View Tools
•