This feature is to be used with in-campus audiovisual (AV) inputs. Hence, it is not available for LearningSpace Enterprise Lite, as the solution is used for web-conferencing-based virtual simulation encounters only. To unlock this feature, please upgrade to the LearningSpace Enterprise solution. |
Center Overview (CO) is displayed by default when entering the Recording module. Here, you can monitor video recordings of multiple rooms simultaneously.
Center Overview (CO) is only available for multi-room configurations. |
The Record Control panel is located on the left of the screen.
The Record Control panel is minimized by default when entering CO; click on the panel to display it. |
With the Record control panel in CO, you can control recordings without entering the Single Room View (SRV) of any of the rooms.
To launch or stop a recording in a room, pick one from the Room drop-down menu and use the red Start Recording or blue Stop Recording buttons.
It is also possible to launch and stop recordings in multiple rooms at the same time:
On the camera panel, a red rec icon goes on when recording is launched to indicate that recording is in progress inside the room: . |
If one or more cameras suddenly stop recording due to any unforeseen reason, an icon will also warn you e.g. if a camera "Disappears". |
Check the availability of cameras on the Cameras tab. |
With the Record control panel in CO, you can set up the activity, case, learner(s), and even the position of the camera (if a PTZ camera is installed in the room).
You can either apply settings to one room or multiple rooms.
1. First, select the room(s) the record controls apply to:
2. The following settings apply to all of the room(s) defined in the first step:
PTZ Preset settings: All camera positions are listed in the drop-down that has been defined in rooms equipped with a PTZ camera. Select a preset position to apply it to the room it was created in.
A PTZ position only applies to the room it was created in. It is not affected by the other settings (room, activity, case, and learner) featured on the Record control panel. |
Would you like to apply the same PTZ preset to multiple rooms at once? Find out more about it here. |
3. Start and Stop recording with the red and blue buttons at the bottom of the panel.
Settings applied with the Record control panel override the settings in rooms where an activity, case, and possibly learners were already set up with the Activity Scheduler or RNSA (in Room Manager). Example: In-Room: Exam 1, Activity: EMT Assessment, Case: EMS George Davis (collapse) is already scheduled. |
For more information go to the Recording - How to pages. |