Room Settings pop-up
The pop-up can be opened by clicking the cogwheel next to the desired room and allows for the specification of the following settings:
Room no.: either a number or a name by which the room is to be distinguished
Room description: the type of the room (e.g. simulation lab, skills lab, auditorium etc.)
In-room Station: a client computer designated for SP data entry
Separate In-room Intercom device: device for in-room intercom announcements
Hallway Station: computer designated for learner data entry (submitting Pre- or Post-Encounter Learner Part)
Separate Hallway Intercom device: device for intercom announcements outside the room
Additional Station: computer designated for display functions
Simulator: selecting one of the available simulators located in the room
Camera #1-5: assigning a maximum number of 5 configured cameras
Record control: assigning a tactile REC button (Push-button) to the room (which is physically located in the room and can be pressed to start a recording)
Location: determining a location (building, site etc.) where the room belongs
In the latest versions of CAE LearningSpace Privacy mode can also be controlled by using a Push-button within the physical rooms. Once a Push-button has been connected to a DAK (Digital Audio Kit) physically, and the DAK is configured on the Cameras tab, it can be selected as a
- Record control device
- Privacy control device
from the following two drop-downs of the Room Settings pop-up:
For more information go to How to Manage Privacy Mode for SP Users.
In case any of the Cameras within the room do not support Privacy Mode, the following warning message appears: